![]()
Most open channel problems at a design desk are the same handful of questions: how much water will this canal carry, how deep will it run, how wide should it be, how steep can it be? OpenFlow is a Mac app that answers them with Manning's equation and keeps every channel you work on in one window.
Solve for the value you don't have
Pick a channel, choose the unknown, and type in the rest. OpenFlow handles four kinds of section:
- Rectangular: solve for discharge, water depth, base width or bed slope.
- Trapezoidal: the same four, with the side slope as an input.
- Circular: discharge, water depth, bed slope or pipe diameter, for culverts and pipes running part full.
- Irregular: enter the surveyed cross-section as station and elevation points and solve for discharge or bed slope. Useful for natural creeks and old canals that no longer match their design drawings.
More than one number
Alongside the answer you get the flow area, wetted perimeter, hydraulic radius, top width, velocity, hydraulic depth and discharge per unit width. OpenFlow also works out the Froude number and the critical depth and velocity, and tells you whether the flow is subcritical or supercritical.
Each channel also gets a stage-discharge rating curve with its table of depths and discharges, plus a drawing of the section with the water surface in it.
![]()
A workspace, not a calculator
Every channel is saved as a solver in the sidebar, grouped by type, so a whole canal system can live in one place: name them by station, come back to them later, and compare one reach with the next. Rename or delete a channel from its Info tab, undo your edits, and work in metric units (metres and cubic metres per second) throughout.
Get OpenFlow
OpenFlow is on the Mac App Store for $9.99 and runs on macOS 14 Sonoma or later. It assumes a basic grasp of open channel hydraulics, whether you're a practising engineer or a student taking the course. Results are for study and preliminary design.
Comments
Post a Comment